XADO 1-Stage Maximum Diesel Truck — The Ultimate Engine Restorer for Heavy-Duty Diesel Fleets

Is your engine losing its edge? Friction, heat, and high mileage are the silent killers of diesel engines. XADO 1-Stage Maximum Diesel Truck is not a simple oil additive — it is a sophisticated atomic-level treatment designed to reverse wear and provide lasting protection for engines with oil capacities between 25 and 45 quarts.

🔬 The Science: Revitalizant® Technology

Unlike traditional additives that only improve oil lubricity, XADO uses patented Revitalizant® technology. Under normal engine heat and pressure, active components bond directly to worn metal surfaces:

Surface Reconstruction: Forms a high-strength ceramic-metal (cermet) coating on pistons, cylinder walls, and bearings.
Geometry Restoration: Rebuilds original factory geometry, healing micro-cracks and scratches.
Diamond-Hard Protection: The resulting surface is harder than the original metal — virtually immune to future wear.

✅ Why Your Fleet Needs XADO Maximum

1. Fuel Economy & Cost Savings

Even a 2–3% reduction in friction translates to significant fuel savings over thousands of miles. XADO helps your rig run leaner and more efficiently.

2. Compression & Power Restoration

XADO seals gaps in the cylinder-piston group, restoring compression to factory specs. You’ll feel the difference on steep climbs and under heavy loads.

3. Reduced Maintenance & Extended Engine Life

By creating a self-healing environment, XADO drastically increases the interval between expensive overhauls and protects against cold-start damage.

4. Ultra-Quiet Operation

Smoothing friction surfaces reduces engine clatter, vibrations, and thermal stress — resulting in a noticeably quieter idle.

🚚 Application & Compatibility

Designed for any heavy-duty diesel application requiring 25 to 45 quarts of oil:

Logistics & Transport: Class 8 semi-trucks, long-haul tractors, freight carriers.
Construction: Excavators, bulldozers, cranes, heavy-duty loaders (Caterpillar, Komatsu, Volvo).
Agriculture: High-capacity tractors, combines, harvesters (John Deere, Case IH, New Holland).
Industrial: Power generators and marine diesel engines.

📋 How to Use

Warm up the engine to normal operating temperature.
Shake well and pour the entire bottle into the engine oil filler neck.
Idle for 10–15 minutes to distribute evenly through the oiling system.
Drive or operate normally — full revitalization completes in approximately 1,000 miles (1,500 km) or 20–25 hours of operation.

⚠️ Do not change the oil during the 1,000-mile treatment interval to ensure the cermet layer is fully formed.

📐 Technical Specifications

RF (Revitalization Factor): 100 — maximum protection and restoration level
Compatibility: All motor oil types (synthetic, semi-synthetic, mineral). Safe for turbochargers and DPF filters.
Protection Duration: Up to 60,000 miles
Engine Oil Capacity: 25–45 quarts
SKU: XA 42712
Barcode: 4820269320802
Country of Origin: Ukraine
HS Code: 381121